What size are license plate screws? Choose the Right Size

License plate screws are the fasteners used to secure a vehicle’s license plate to the frame or body. Their size can vary, but commonly they are small, around 1/4″ to 3/4″ in length. The screws typically have a standard or metric thread, and the head may be flat, hex, or Phillips. It’s essential to use the correct size to ensure a snug and secure fit.

When it comes to securing your license plate, the right size of screws is crucial. But what size are license plate screws? This question is more important than it seems because using the correct screws ensures your plate stays in place safely and legally. Typically ranging from 1/4″ to 3/4″ in length, these screws are a small but vital part of vehicle maintenance.

How big are number plate screws?

Number plate screws typically vary in size, but most commonly, they are about 4mm to 6mm in diameter and around 10mm to 20mm in length. The size depends on the vehicle make and model, as well as the country’s standard. 

In the UK, for instance, screws are usually 4.8mm in diameter. It’s crucial to use the correct size to ensure a secure fit without damaging the plate or vehicle. When replacing or fitting a number plate, it’s recommended to check the vehicle manual or consult a professional for the exact size needed, as it is illegal to paint your license plate.

What size hole do you drill for a license plate?

The size of the hole you should drill for a license plate depends on the screw size being used, which is typically around 4mm to 6mm in diameter. Generally, you’ll want to drill a hole slightly larger than the screw’s diameter to allow for easy insertion and alignment. 

For most standard screws, a hole of 1/8 inch (about 3mm) to 1/4 inch (about 6mm) should be sufficient. It’s crucial to check the specific requirements for your vehicle and license plate, and when in doubt, consult a professional or the vehicle’s manual.

How do you put a front license plate on without drilling holes?

To attach a front license plate without drilling holes, you can use alternative methods like adhesive mounting strips, suction cups, or a bracket that clamps to the front bumper. Adhesive strips offer a quick, drill-free option but may not be as secure for long-term use. 

Suction cups are more temporary and suitable for smooth surfaces. Clamp-on brackets attach to the bumper’s edge and hold the plate without any permanent alterations. Always ensure the method chosen is secure and legal in your jurisdiction before proceeding.

What size are license plate screws

What size are license plate screws

The size of license plate screws can vary widely depending on the make and model of the vehicle and the region. However, in the United States, a common size for vehicle license plate screws is #14 with a length of 3/4 inches. Metric sizes might be around M5 or M6. 

It’s essential to check the specific requirements for your vehicle since manufacturers may use different sizes. If you’re replacing screws, it’s a good idea to take an old one to the store to match it or consult your vehicle’s manual for the exact specifications needed.

BMW

License plate screw sizes for BMWs typically vary by model and year. Generally, most BMWs use standard screws measuring #14 x 3/4 inches. However, some models might require different sizes. It’s crucial to refer to the vehicle’s manual or consult with a BMW dealership for the exact specifications for your specific model. 

The screws are made from a material resistant to rust, like stainless steel, to avoid corrosion. Always verify the size before purchasing or installing to ensure a proper fit and avoid damage to your vehicle.

Ram Truck

License plate screw sizes for Ram Trucks and BMWs vary. Typically, Ram Trucks use screws about 1/4″ x 3/4″ for the front and rear plates. BMWs, on the other hand, generally use #14 x 3/4″ screws. However, these sizes can differ based on the model and year. 

It’s best to check the vehicle’s manual or consult with a dealership for the exact size. Opt for stainless steel screws to prevent rusting. Always confirm the appropriate size and thread type for your specific vehicle to ensure a secure fit and avoid damage.

Honda

License plate screw sizes for Honda vehicles can vary by model and year, but a common size is M6-1.0 x 16mm. This metric size means a 6mm diameter with a 1.0 thread pitch and 16mm length. It’s important to check your specific Honda model’s manual or consult with a dealership for the precise size required. 

Stainless steel screws are recommended to prevent rust and corrosion. Before purchasing or replacing screws, ensure you verify the size and type needed for your Honda to ensure a secure fit and prevent damage to the vehicle.

Nissan

License plate screw sizes for Nissan vehicles typically vary between models and years. A common size used is M6-1.0 x 16mm or M6-1.0 x 20mm, where “M6” refers to a 6mm diameter, “1.0” indicates the thread pitch, and “16mm” or “20mm” denotes the length. 

It’s crucial to check the specific requirements for your Nissan model, either by consulting the owner’s manual or contacting a Nissan dealership. Opting for stainless steel screws can help prevent rust. Always confirm the correct size and type to ensure a secure fit and avoid damage to the vehicle’s body.

Chevrolet

License plate screw sizes for Chevrolet vehicles can vary depending on the model and year. Commonly, Chevrolet cars and trucks use #14 x 3/4 inch screws. However, some models might require different sizes or lengths. It’s essential to refer to the vehicle’s manual or check with a Chevrolet dealership for the exact specifications for your specific model. 

Choose stainless steel screws to resist rust and ensure longevity. Before purchasing or installing new screws, always verify the size and thread type needed for your Chevrolet to ensure a proper fit and prevent any damage.

Ford F-150

License plate screw sizes for the Ford F-150 can vary by model year, but a common size is #14 x 3/4 inches. This refers to the screw’s diameter and length, suitable for most F-150 trucks. However, there can be variations, so it’s crucial to check the specific requirements for your particular F-150 model, either by consulting the owner’s manual or a Ford dealership. Opting for stainless steel screws can prevent rust and corrosion. Always ensure you confirm the correct size and type to guarantee a secure fit and avoid damage to your truck.

Toyota

License plate screw sizes for Toyota vehicles can vary depending on the model and year. Generally, a common size used is M6-1.0 x 16mm, where “M6” indicates a 6mm diameter, “1.0” is the thread pitch, and “16mm” represents the length. 

However, it’s important to consult your Toyota’s owner’s manual or check with a dealership for the precise size required for your specific model. Using stainless steel screws is advisable to prevent rust. Always verify the correct size and type of screws for your Toyota to ensure a proper fit and prevent damage to the vehicle.

Where to Buy Screws for License Plates?

You can buy screws for license plates at various locations. Automotive parts stores like AutoZone, O’Reilly Auto Parts, or Advance Auto Parts typically carry a wide range. Local hardware stores, such as Home Depot or Lowe’s, also stock these screws. 

Online marketplaces like Amazon or eBay offer a range of options with the convenience of home delivery. For vehicle-specific screws, visiting a dealership that corresponds to your car’s make can ensure you get the exact fit. Remember to know the size and type you need before purchasing.

How to Replace License Plate Screws

Replacing license plate screws is a straightforward task.

1 Step . Gather Tools: You’ll need a screwdriver that matches the head of your license plate screws (usually Phillips or flathead) and the new screws.

2 step . Remove Old Screws: Use the screwdriver to turn the old screws counterclockwise. If they’re rusted or stuck, you might need a rust penetrant spray. Apply it, wait a few minutes, then try again.

3 step . Clean the Area: Once the screws are out, clean any dirt or rust from the screw holes and the back of the license plate.

4 step . Align the License Plate: Hold the license plate or frame in position over the holes.

5 step . Hand-Tighten New Screws: Start the new screws by hand to avoid cross-threading. They should go in fairly easily if they’re the correct size.

6 step .Tighten with Screwdriver: Once the screws are in place, use the screwdriver to tighten them. Don’t over-tighten, as this can strip the threads or damage the license plate.

7 step . Check Security: Gently pull on the plate to ensure it’s securely attached.

What kind of screwdriver do I need to take off a license plate?

The type of screwdriver needed to remove a license plate typically depends on the screw head type used. Most commonly, license plate screws have either a flathead or Phillips head. For flathead screws, you’ll need a flathead screwdriver, which has a flat tip. 

For Phillips head screws, you’ll need a Phillips screwdriver, which has a cross-shaped tip. Occasionally, some vehicles might use specialty screws (like Torx or hex) for added security, requiring a specific bit or driver. Always check the screw head type before selecting your tool.

Does Lowes have license plate screws?

Yes, Lowe’s typically carries a variety of hardware, including screws suitable for license plates. They usually have a range of sizes and types, including stainless steel options which are ideal for preventing rust and corrosion. While they may not have vehicle-specific screws, they often stock the common sizes used by many cars. 

It’s a good idea to know the exact size and type of screw you need for your vehicle before you go. If you’re unsure, you might bring an old screw for comparison or check your vehicle’s manual for specifications.

How do you fit number plates without screws?

How do you fit number plates without screws

Fitting number plates without screws can be done using adhesive pads, double-sided tape, or a number plate holder. 

1. Clean the Area: Ensure the mounting surface on the car and the back of the plate are clean and dry.

2. Apply Adhesive: Attach strong, weather-resistant double-sided tape or adhesive pads to the back of the number plate.

3. Position the Plate: Carefully align the plate where you want it on the car.

4. Press Firmly: Press the plate firmly against the surface for a good bond.

Will double-sided tape hold a license plate?

Double-sided tape can hold a license plate if it’s high-quality, automotive-grade, and designed to withstand weather and temperature variations. However, its effectiveness depends on factors like the surface cleanliness, tape quality, and environmental conditions. Ensure the mounting area and plate are clean and dry before application. 

Press firmly for a strong bond. While double-sided tape can be a convenient and clean-looking solution, it might not be as secure as screws, especially over time or in harsh conditions. Always check if it’s a legally accepted method in your area.

Conclusion

License plate screws are a small but crucial component in vehicle maintenance, ensuring the secure attachment of license plates. Commonly measuring between 1/4″ to 3/4″ in length in the U.S., or around 4mm to 6mm in diameter in the UK. These screws must be the correct size to avoid damage and ensure a snug fit. 

Methods for attaching plates vary, including drilling holes or alternative no-drill methods like adhesive strips or clamps, which are particularly useful for those who wish to avoid altering their vehicle. The material of the screws, often stainless steel, is also important to prevent rust and corrosion. 

Specific sizes can vary greatly between manufacturers and models, from BMWs to Ram Trucks to Toyotas, emphasizing the importance of consulting your vehicle’s manual or a dealership for accurate information. When replacing or fitting license plate screws, the right tools, knowledge, and screws tailored to your vehicle’s specifications are essential to maintain safety, legality, and the vehicle’s aesthetic.

Frequently Asked Questions 

What materials are license plate screws made of?

They are commonly made of stainless steel or plastic, but some might be made of other corrosion-resistant materials.

Can I replace my license plate screws with anti-theft screws?

Yes, anti-theft screws are available in standard sizes and can be a good investment to secure your license plate.

What is the most common license plate screw size?

The most common size is usually #14 (1/4″) in diameter, but this can vary.

Do I need special tools to install license plate screws?

Usually, a standard screwdriver or socket wrench is sufficient, but some anti-theft screws may require a special tool.

How often should I check or replace my license plate screws?

Check them regularly for tightness and signs of corrosion, and replace them if they are damaged or corroded.

Leave a comment