How To Remove Front License Plate Bracket?

Remove Front License Plate Bracket refers to the process of detaching the holder or frame that secures the vehicle’s front license plate. This typically involves unscrewing fasteners and carefully pulling the bracket away from the car’s front bumper. The procedure of covering license plates is often performed to improve aesthetics or to comply with different regional regulations. Why do people cover their license plate?

Are you curious about altering your car’s look? You wonder, How to Remove Front License Plate Bracket? This simple task can refresh your vehicle’s appearance, involving just a few tools and steps. It’s a quick way to customize your car and comply with local laws.

Tools You Need

Here’s a table listing the tools you might need to remove a front license plate bracket, along with their potential uses.

ToolPotential Use
Screwdriver (flathead)To remove screws or pry off caps.
Screwdriver (Phillips)To remove screws commonly used in vehicle assemblies.
Wrench or Socket SetTo remove bolts that might be securing the bracket.
Trim Removal ToolTo safely pry off clips without damaging the vehicle’s trim.
Automotive Adhesive RemoverTo clean off any adhesive residue left behind after bracket removal.

Steps to Remove the Bracket

Steps to Remove the Bracket

To remove a license plate bracket, park safely, locate fasteners (screws, bolts, or clips), and carefully remove them. Address any adhesive, clean the area, inspect for damage, and consider local regulations to ensure compliance with laws regarding front plates.

Prepare Your Vehicle

To prepare your vehicle for the removal of the front license plate bracket, park it in a safe, level area where you have ample room to work. Ensure the vehicle is turned off, the parking brake is engaged, and the area is well-lit. Gather all necessary tools beforehand, and have a clean, soft cloth or workspace ready to place any removed parts or tools to avoid losing them.

Locate the Bracket Fasteners

To locate the bracket fasteners, closely inspect the front license plate bracket on your vehicle. Identify how it’s attached to the bumper—typically, this will be through screws, bolts, or plastic clips. Look for any caps or covers that might be concealing the fasteners. Note the type and size of each fastener, as this will determine the tools (like a screwdriver or wrench) you’ll need for removal.

Remove Screws or Bolts

To remove screws or bolts from the license plate bracket, select the appropriate screwdriver or wrench that matches the fastener heads. Gently turn the tool counterclockwise to loosen each screw or bolt. Apply steady pressure to avoid stripping the heads. Keep a steady grip and work patiently to ensure all fasteners are removed without causing damage to the vehicle’s bumper or the bracket itself. Store removed items in a safe place.

Address Clips or Adhesive

If the bracket is secured with clips, gently use a trim removal tool to pry and release them without damaging the vehicle’s trim. For adhesive, carefully wiggle the bracket to loosen it, applying steady, even pressure. Once detached, remove any residual adhesive from the bumper with an automotive adhesive remover, applying it as directed and wiping the area clean. Proceed cautiously to avoid damage to the vehicle’s paint or surface.

Clean the Area

After removing the bracket, clean the exposed area of the bumper to remove dirt, adhesive residue, or marks. Use a soft, clean cloth and a gentle automotive cleaner suitable for your vehicle’s exterior. Apply the cleaner, scrub lightly to lift any dirt or residue, and then wipe the area dry. This not only ensures a neat appearance but also helps identify any potential damage or holes left by the bracket’s removal.

Inspect for Damage or Holes

Once the bracket is removed and the area is clean, thoroughly inspect the bumper for any damage, such as scratches, dents, or holes where the bracket was attached. If you find holes, consider your options: leave them, cover them with caps or plugs, or seek professional bodywork for a seamless repair. Evaluate the extent of any damage to determine the best course of action for maintaining your vehicle’s aesthetic and structural integrity.

Consider Local Regulations

Before permanently removing the front license plate bracket, it’s crucial to consider local regulations. Many regions require a front license plate for identification purposes. Check with your local Department of Motor Vehicles (DMV) or equivalent authority to understand the legal requirements in your area. Non-compliance can lead to fines or other legal issues, so ensure you’re adhering to your local laws before deciding to go without a front plate.


  • Be Gentle: Applying too much force can damage your car’s bumper or paint.
  • Consult a Professional: If you’re unsure or uncomfortable with any step, it’s wise to consult a professional mechanic or body shop.
  • Check for Special Instructions: Some vehicles might have specific instructions or require special tools. Always check the owner’s manual or manufacturer’s guide.

Remember, while these steps are generally applicable, every car is different. If your Mercedes or any other vehicle has a unique front bracket setup or if you’re simply unsure, seeking professional assistance is the best way to avoid potential damage.

How To Remove Front License Plate Bracket Mercedes

Removing a front license plate bracket on a Mercedes or any vehicle should be approached with caution to avoid damaging the vehicle’s body or paint. Here’s a general guide you might follow, but please check your vehicle’s manual or consult a professional for instructions specific to your model.

Gather Tools: You need a screwdriver (flathead or Phillips), a wrench, and possibly a trim removal tool.

Inspect the Bracket: Look closely at the bracket to identify how it’s attached. Common methods include screws or bolts.

Remove Screws/Bolts: Use the appropriate screwdriver or wrench to carefully remove them. If they’re covered by caps, you may need a flathead screwdriver to pry the caps off.

Carefully Detach the Bracket: Once the fasteners are removed, gently pull the bracket away from the bumper. If it’s stuck due to dirt or adhesive, gently wiggle it to loosen it without forcing it.

Clean the Area: After removing the bracket, clean any dirt or residue off the bumper. If there was adhesive, you might need a special automotive adhesive remover.

Inspect for Holes or Damage: Sometimes, removing the bracket will reveal holes in the bumper. You can leave them, cover them with caps or plugs, or seek professional help for a more aesthetic solution.

Consider Local Laws: Before permanently removing the front license plate bracket, ensure it’s legal to drive without a front license plate in your area. Some regions require front plates.

How Do You Remove The Front License Plate On A Tesla?

Removing the front license plate on a Tesla, or any vehicle, generally involves a few straightforward steps. However, it’s essential to first check the legal requirements in your area, as many regions require a front license plate by law. If it’s legal to remove it, here’s a basic guide.

Locate Screws or Fasteners: The license plate is usually attached to the front bumper with screws or fasteners. For a Tesla, it’s typically mounted on a bracket.

Gather Tools: You’ll likely need a screwdriver or a wrench. The exact tool depends on the type of screws or fasteners used.

Remove Screws or Fasteners: Carefully unscrew or unfasten the screws. Keep them in a safe place in case you need to reattach the plate later.

Remove the Bracket (if applicable): If there’s a bracket, it might be clipped onto the grill or screwed into the bumper. Remove it by unclipping or unscrewing.

Clean the Area: Once the plate and bracket are removed, clean the area to remove any dirt or residue.

Cover Holes: If there are holes or indentations left, you want to cover them with caps or plugs that match your car’s color for aesthetic purposes.

Remove Front License Plate Holder Tesla Model 3

Remove Front License Plate Holder Tesla Model 3

To remove the front license plate holder from a Tesla Model 3.

Gather Tools: Usually, you’ll need a flat-head screwdriver or a pry tool designed for automotive use.

Locate the Holder: The Model 3 typically has a front license plate holder that’s mounted with adhesive and clips rather than screws.

Loosen Adhesive: If it’s held on by adhesive, you’ll want to loosen this first. Gently heat the area with a hairdryer (on a low setting) to soften the adhesive. Be cautious not to overheat the paint.

Pry the Holder Off: Use your flat-head screwdriver or a pry tool to gently lift the holder off. Insert the tool between the holder and the bumper and carefully work your way around the holder. It should gradually come loose.

Clean Residue: Once removed, there might be adhesive residue left on the bumper. Use an adhesive remover or gently rub with a cloth soaked in warm, soapy water to remove this. Be gentle to avoid damaging the paint.

Inspect for Damage: Check the area for any damage or marks left by the holder. If there are minor scratches, some might be buffed out with a gentle, automotive-specific polishing compound.


Removing a front license plate bracket is a straightforward process aimed at enhancing the vehicle’s aesthetics or complying with local laws. This task requires basic tools such as screwdrivers, wrenches, and potentially adhesive removers or trim tools. 

The process involves parking the vehicle safely, locating and removing fasteners, addressing any adhesive with care, and cleaning the area afterward. It’s vital to inspect for any resultant damage and consider local regulations regarding front plates. 

While the process is generally simple, it varies by vehicle; for instance, a Tesla Model 3 might have its plate holder attached with adhesive and clips instead of screws. Always proceed with caution, consult a professional if unsure, and ensure compliance with local laws to avoid legal repercussions.


What if I’m not confident in removing the bracket myself?

If unsure, it’s always best to consult a professional mechanic or body shop to avoid potential damage.

Are the steps to remove the bracket the same for all vehicles?

While the basic steps are similar, the specifics can vary based on the vehicle’s make and model. Always check your owner’s manual or seek professional advice for instructions tailored to your vehicle.

How long does it take to remove a front license plate bracket?

The time can vary, but generally, it’s a quick process that can take anywhere from a few minutes to half an hour, depending on the complexity and tools required.

Will removing my front license plate bracket affect the resale value of my car?

It might, especially if it’s illegal in your area or if the removal process causes damage. Always consider the potential impact and consult with a professional if you’re concerned about resale value.

Leave a comment